REFRIGERATION SIMULATOR

Professional Cold Room Sizing & Brand Direction Simulator

Estimate refrigeration demand for positive cold rooms, freezer rooms, blast chillers, blast freezers, and portable cold storage. This interactive calculator is built for early-stage technical-commercial sizing and then points the reader toward the most relevant manufacturer family direction.

User-friendly

Google Blogger ready

Daikin / Thermo King logic

Early-stage commercial sizing

Project Inputs

Application & operating profile

Application type Positive cold room Freezer room Blast chiller tunnel Blast freezer tunnel Portable / temporary cold storage

Product family General food product Fruit / vegetables Meat / poultry Fish / seafood Dairy Pharma / temperature-sensitive goods Ice cream / deep frozen goods

Room setpoint (°C)

Ambient temperature (°C)

Product inlet temperature (°C)

Product mass per day (kg/day)

Pull-down / process hours (h)

Unit running hours per day (h)

Room geometry & envelope

Length (m)

Width (m)

Height (m)

Panel U-value (W/m²K)

Equivalent air changes per hour

Door openings per hour

Internal loads

People inside at same time

Lighting load (W)

Evaporator fans load (W)

Other internal loads (W)

Safety factor

Project name

This simulator is intended for pre-sizing, blog publishing, sales enablement and first technical conversations. Final unit selection must always be validated with manufacturer software, real evaporating temperature, condensing temperature, refrigerant, piping layout, humidity, door traffic and defrost regime.

Recommendation Output

Ready to calculate

Recommended selection capacity

— kW

Fill in the data and run the simulator.

Room volume — m³

Total surface — m²

Average load — kW

Selection load — kW

Transmission load— W

Infiltration load— W

Product load— W

Respiration load— W

People load— W

Lighting + fans + internal loads— W

Daikin direction

Recommended mainly for fixed cold room applications and standard installed refrigeration projects.

Fit score: —

Thermo King direction

Recommended mainly for portable, temporary, modular or container-based cold storage solutions.

Fit score: —

Your brand and application insight will appear here after calculation.

Author: Ryan KHOUJA. This content is provided for informational purposes only and may contain errors, omissions, inaccuracies, or simplified assumptions. It does not constitute engineering, technical, commercial, legal, or professional advice and should not be relied upon as the sole basis for design, specification, procurement, or operational decisions. Readers are strongly advised to consult a qualified professional before using or relying on any part of this material. No reproduction, distribution, publication, adaptation, or reuse of this content, in whole or in part, is permitted without the prior written permission of the author. All trademarks, brand names, product names, and manufacturer references mentioned herein remain the property of their respective lawful owners. This material is an independent OSINT-based analytical exercise created for educational and informational purposes only and is not endorsed by, affiliated with, or approved by any of the brands or companies mentioned.